Features and Applications:

1. To be applied directly on brickworks.
2. Masonry works.
3. Plaster and stucco works.
4. Terrazzo floorings.

Substrates

1. Conventional cement and brickwork based substrates.
2. Substrates must be resistant, stable, sound and clean, free of dust, demolding agents, organic products, etc.
3. In case of hot or windy weather conditions or when applying over absorbent substrates, it is advisable to wet the substrate and wait till the thin layer of water disappear.
4. Do no apply on clay or on paint

Instructions for use

1. Apply water and mix by hand or mechanically until it takes on an even and workable consistency.
2. For plaster works, spread the mortar on the substrate with a towel and let rest enough time before floating.

Cautions and recommendations

1. Do not apply below 5°C nor above 30°C.
2. Do no apply when there is a risk of forst, rain, strong wind or direct sunlight.
3. For a thickness of over 1.5c.m, it is advisable to apply the product in two coats
4. In extremme weather conditions (strong winds or high temperature) it is necessary to water the product with light sprinklers the day after applying it.

Packaging

25kg plastic-lined paper bags
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Note

Instructions of use are given based on our testing and knowledge and do not imply any commitment. Said instructions do not free the user from examining and verifying the product for its correct use.

The manufacturer's liability is limited to the value of the used goods.