Features and Applications:

1. AQUASTOP Effect: Repels water creating a "pearl" effect.
2. BIOACTIVE Technology: Avoids microbian grouth in wet areas.
3. To be applied indoors and outdoors.
4. High resistance to abrasion.
5. High hardness.
6. Intense colour.
7. Easy to clean.
8. Very fine texture.
9. Low water absorption.
10. Cracking resistant.
11. Antifungus.
12. Antialgae.
13. Hydrorepelant.

Substrates

1. Empty joints must be dry and clean in all their length and depth.
2. Grouting must be carried out at least 24 hours after tile setting on walls or 48 hours after tile setting on floors.
3. Before starting the application, temporary porefiller PROTECMOR protects porous and non-porous ceramic from possible pigment stains.

Instructions for use

1. Add water and mix by hand or mechanically until you have an consistent paste (non liquid).
2. Let the mixture stand for 5 minutes and remix.
3. When working in small areas, grout the joints with a rubber trowel or rechargeable grouting gun, pressing on the paste the material firmly.
4. The mixture must be applied diagonally to the joints pressing the mixture onto the joints and removing the excess.
5. Let the material dry slightly for 20-30 minutes. When the mixture becomes dull, you can clean the surface with a hard, slightly wet sponge.
6. Polish the surface by using a clean dry cloth to remove dust only when the product has hardened in the joint.
7. Let dry for at least 24 hours before normal traffic.
8. Use Perma Clean to clean up stained tiles. Make sure the product does not damage the tile. Do not use on grouted joints.

Cautions and recommendations

1. Do not apply below 5ºC nor above 30ºC.
2. Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
3. Grouting must be carried out at least 24 hours after tile setting on walls or 48 hours after tile setting on floors.
4. Do not use in expansion joints or joints subject to structural movements.
5. Grout the joints once the floor or cladding is completely dry.
6. Do not clean with acids as it may affect application.

Packaging

150kg plastic-coated bags and 3kg polyethylene bags
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Note

Instructions of use are given based on our testing and knowledge and do not imply any commitment. Said instructions do not free the user from examining and verifying the product for its correct use.

The manufacturer's liability is limited to the value of the used goods.